Projecta IM2000 Instrukcje Operacyjne Pobierz pdf (Strona 56)

Appendix A

Standard Connection Options

Appendix Overview

The IM483 has multiple connection options available to the user. In general,

these options will not change the operational characteristics of the driver.

These connector options give the user multiple choices in how to interface and

mount the driver into a system. Listed below are the connector options and

how they may be used.

IM483-34P1

The IM483-34P1 features the standard 8 pin terminal block at the connector P2

location. P1 has been replaced by a 34 pin header.

The typical use for this connector style is remote control of the microstep

resolution select inputs. The advantages of this control method are discussed

later in this appendix.

IM483-8P2

This connector option uses 8 - 0.045 square pins at the P2 connector location.

The P1 connector location uses 8 -0.025 square pins.

This connector style would be advantageous in a scenario where the user desires to

either solder or plug the IM483 directly into a system PCB. Dimensions and PCB

hole patterns are given later in this appendix.

IM483-34P1-8P2

This option combines the features and potential uses of the IM483-34P1 and

the IM483-8P2.

IM483-PLG

The IM483-PLG replaces both connectors P1 and P2 with an Altech 8 position

pluggable interface. The removeable, plug-in screw terminal set is available as an

option (PLG-R).

This connector option is useful in system designs where ease of removal is

desired. For example, the IM483-PLG is pin compatible with the IM804/5-

PLG. If more power is needed the drives are easily swapped.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 76 77

Brak uwag

Projecta IM2000 Instrukcje Operacyjne Strona 56